A standard mirror mount designed to fit on a horizontal arm of a mirror or similar.
Available by itself (as in the picture) or complete with a fitted coax lead and PL259.
A stronger mirror mount designed to fit on either the horizontal or vertical arm of a mirror or similar.
Fitted with a 3/8 mount with SO239 socket.
Available by itself (as in the picture) or complete with a fitted coax lead and PL259. Can also be supplied without the 3/8 mount.
A flat bar mirror mount which has a u-bolt fitting on it rather than the smaller bracket.
Suitable for use on bars up to 2" diameter.
Available by itself with a 3/8 stud as shown, in a kit with coax, or with a ground-plane kit for use on fibre-glass cabs etc.
A good quality mirror mount which has the advantage of a swivel, so that you can fit it on a sloping arm etc.
Fully adjustable up to 90 degrees.
Can be supplied either with a blank hole, with a 3/8 thread mount, or complete with coax and PL259 fitted.
Also available with a SO239 fitting instead of 3/8 thread.
A special mirror mount which has a built-in ground plane, designed for use on trucks with a fibreglass cab.
Supplied complete with coax and plug.
An adjustable mirror mount with 16mm hole suitable for fitting various 3/8 or SO239 mounts.
A large locking control allows the mount to be quickly laid down.