To use several radios on one antenna, or several antennas on one radio.
An automatic 2-way antenna switch, allowing you to operate 2 radios on a single antenna. Ideal if you have radios in 2 separate rooms or just to save the need for manually switching your antenna.
Automatically switches the antenna to your radio as soon as you transmit, no manual switching required.
Once the antenna switches to your radio it remains on that radio until the other one transmits. The antenna is only connected to one radio at any time, so you can only receive on the one radio.
Does not need any external power source.
Popular good quality 2-way antenna switch.
Popular good quality 3-way antenna switch.
Popular good quality 4-way antenna switch.
Workman 3-way antenna switch. Includes an "off" position to disconnect all three antennas (or radios).
A good quality 2-way antenna switch with heavy die-cast casing.
Operating frequency up to 600MHz with a maximum power handling of 1000W.
Centre ground tap keeps the unused socket grounded.
A heavy duty Amateur quality antenna switch with heavy cast body.
Similar in design the Opek CX-201 but lower quality.
Available with SO239 sockets or N-Type sockets.
Fitted with SO239 sockets.
Looks similar to the CS201 above but the switch has a much more positive feel to it.
A robust and well engineered 2-way coax switch that will handle up to 2KW. This is frequency dependent and will reduce at UHF.
A robust and well engineered 2-way coax switch for N-Type connectors that will handle up to 2KW. This is frequency dependent and will reduce at UHF.
A robust and well engineered 3-way coax switch that will handle up to 1.5KW. This is frequency dependent and will reduce at UHF.
As an alternative to a co-phase harness, this coupler can be used to join 2 antennas and convert the impedance to match a single radio.