A 3/8 thread mount with "DV" connection underneath.
This is our most popular mount, having a good rubber seal and the use of a "DV plug" means the coax comes out at a right angle (ie parallel with the body) rather than straight down.
A 3/8 thread mount with a "new style DV" connection underneath.
The mount is for use with leads fitted with the "new style" DV elbow plug which has a male pin on it (see additional picture). The mount is also supplied with a small "pin" (see bottom of picture) which allows you to use it with a lead that has the "old style" DV plug on it.
This is our most popular 3/8 mount, having a good rubber seal and the use of a "DV plug" means the coax comes out at a right angle (ie parallel with the body) rather than straight down.
A mount with DV (swivel) top and "DV" connection underneath.
By adding a "3/8 to DV adapter" (C52) you can use this mount to angle the antenna (eg for mounting on a sloping surface).
The mount has a good rubber seal and the use of a DV plug means the coax comes out at a right angle (ie parallel with the body) rather than straight down.
Remember to order a wingnut/bolt to go with it if you need one!
A mount with DV (swivel) top and "new style DV" connection underneath.
A 3/8 thread mount with SO239 coax connection underneath.
Often used on mirror mounts etc.
We also stock a heavy duty version, which I would recommend for the small extra in price.
Heavy duty version.
A 3/8 thread mount with SO239 coax connection underneath and a large washer.
A popular heavy duty mount.
Note that the coax will come straight down from the mount, so you need plenty of room underneath it when fitting.
Chrome 3/8 stud mount
A heavy duty 3/8 thread mount with SO239 coax connection underneath.
The construction is very strong and ideal for large and heavy antennas.
A 3/8 mount where the coax fits directly into the base. No soldering required, simply clamps together.
As found on many gutter and mirror mounts.
Has the advantage of a very low profile (so can be fitted under roof lining etc).
A slim 3/8 mount complete with 4m coax and PL259 fitted.
Often used on gutter mounts, mirror mounts etc.
Mounts as in the picture but with coax lead fitted.
A slim 3/8 mount which is moulded onto a 5m length of RG58 coax with a PL259 plug fitted on the other end.
Designed for fitting to mirror mounts etc.
Please note that because of the design it will only fit on mounts over approx 3mm thick (usually alloy mounts). To fit it on thinner surfaces you would need to grind/cut the lip off the plastic insulating washer.
A very heavy duty 3/8 thread mount with a SO239 fitting underneath.
This is a VERY strong mount and is the ideal mount for very large/heavy antennas such as a Firestik or 9ft whip.
Has a large serrated washer underneath.
We have had the Valor version of this for sale in the past for over £10!
A new heavy duty stud mount, similar to the old Firestik super stud mount.
The mount has 2 x 2.5" stainless steel plates (one above and one below the body), a rubber seal and a heavy duty 3/8 thread mount with SO239 fitting underneath.
Ideal for very large antennas or for where the vehicle body is thin & needs extra support.
A very heavy duty 3/8 thread mount made by Sirio, for their range of large 3/8 thread antennas.
Standard 3/8 thread for the antenna and a SO239 socket for the coax plug.
Can be used in a variety of mounts (eg mirror) or directly through the body.
The strongest body mount we have ever stocked - designed for use with the very big & heavy antennas such as a 7ft Firestik!!
The 3/8 thread bolt shown in the picture can be unscrewed so that you can fit a standard 3/8 antenna into the mount.
The mount is fitted to the body with 3 bolts. The coax is fitted directly to the mount using crimp connectors.
A SO239 mount with "new style DV" plug fitting underneath.
Made by Sirio and designed to match their range of SO239 fitting antenna (eg Hypower 3000/4000), but equally suitable for any make of antenna which has a SO239 fitting.
Good rubber seal underneath and supplied complete with a screw-on weather cap.
Heavy duty SO239 body mount - with SO239 top for antenna and SO239 underneath for coax connection.
For use with SO239 fitting antennas, not 3/8 thread antennas.
A SO239 body mount with a right angle SO239 socket underneath it.
This is the Sirio version of the one above, it is very similar but is more heavy duty.
Often used on mirror, hatch, gutter mounts etc.
A SO239 mount where the coax fits (and solders) directly into the mount.
These are often found on gutter and mirror mount.
Low profile, ideal for fitting where space is limited.
Same as the Moonraker version below but much better quality.
Supplied without coax.
A SO239 mount complete with 4m RG58 coax fitted.
Same mount as the one above, but supplied with coax fitted.
Click here to compare the different Sirio leads.
The strongest way to fit an antenna onto a vertical surface (eg side or back of truck).
This mount requires 2 small holes to be made in the body, rather than the usual 1 larger hole.
Coax is fitted directly to the mount, using ring terminals.
Can be supplied as a mount only, or complete with a coax lead with connectors and plug fitted.
Replacement screw-on weathercap for Sirio SO239 fitting mounts.
Can also be used on most other SO239 mounts.
A metal protective cap to fit on SO239 mounts.
Protects against both dirt and damage.
Note: price is for ONE cap.
An extra long double female joiner, for joining two PL259's together. Approx length 2".
This one is supplied with 2 nuts on it, and is suitable for uses such as chassis mounting or even as a body mount.
The version below is a better quality version with thicker nuts & is available in 3 sizes.