Standard size PL259 coax plug, to fit standard thin coax (RG58).
Available in 2 different qualities.
Short bodied PL259 coax plug, to fit standard 6mm thin coax (RG58).
Can be useful where space is limited.
PL259 coax plug, to fit RG Mini-8 coax (7mm).These have a slightly larger hole to accept the larger diameter of this coax.
Only standard quality currently available.
Standard size PL259 coax plug, to fit thick coax (RG213).
Available in different qualities.
A standard PL259 connector, available for RG58 (6mm) and RG-8 Mini (7mm).
Slightly better quality than our "standard" 85p plus, these are gold plated on both the pin and casing.
Currently available in 6mm (RG58) only.
A pack of 10 x standard quality PL259's.
Choice of 6mm, 7mm or 9mm.
Compression type PL259 for RG58, Mini 8 and RG213 coax.
Available in 3 sizes:
Compression type PL259 for Westflex W-103 and Moonraker Formula Zero coax.
This is an extra large plug for 10mm coax.
A double female joiner, for joining two PL259's together.
Often used for adding an extension lead to coax.
Quantity discount available - click "more details"
An extra long double female joiner, for joining two PL259's together.
This one is supplied with 2 nuts on it, and is suitable for uses such as chassis mounting or even as a body mount.
A double male, with PL259 connection on each end.
Can be used instead of a short patch lead etc.
A SO239 socket for either rivet or screw mounting.
As used on the back of radios, swr meters etc.
A SO239 socket which is secured by a nut.
As used on the back of some radios, swr meters etc.
A right angle adapter with a PL259 plug at one end and SO239 socket at the other.
Handy if you are short of space behind your radio.
A "T" connector for PL259's.
Has 3 x SO239 sockets.
A cheaper version of the one above
Has two sockets, plus a "fixed" PL259 male in the centre.
A quick release adapter to fit on a PL259 plug, ideal for use on test leads.
A standard PL259 screws into the SO239 socket and then instead of "screwing" the PL259 to the radio (or whatever) you just push it on.
Solder-on BNC plug to fit standard 6mm coax.
I recommend the solderless version - it is much easier to fit, grips the cable better, and is re-usable.
A BNC plug for 6mm coax which can be fitted with only a small screwdriver. No soldering iron required.
Fits similar to a TV plug. The clamp grips the cable securely and we have found these much less likely to pull off or come loose than a standard solder type.
Can be easily removed and re-fitted.
Solder-on BNC plug to fit low loss 9mm coax.