Original

Small original replacement mic for early Midland 78 plus and 48 plus, with channel up/down controls on the front.

Model number MR-120.  With 6 pin plug fitted.

Original replacement microphone for Midland Multi 78,48 & 248, with channel up/down and lock controls on the top.

Will also work on the Midland 38 & 98, but the lock button will not do anything.

With 6 pin plug fitted.

Original replacement microphone for the Midland M20 radio.

Three buttons on top for Up, Down & Priority.

Also compatible with Midland Alan 48, Alan 78, 48 Excel, Midland 248, Midland 248XL, Midland 278 and Alan 121 (For these models the PRIORITY button becomes LOCK).

Fitted with a 6 pin plug.

Original replacement microphone for Midland 210DS & Midland 203, WITHOUT channel up/down controls on the top.

These have an electret mic element and could be used on many of the newer radios that use electret mics, if rewired to suit.

Fitted with a 4 pin plug wired "Uniden".

Small original replacement mic for various Team radios, with channel up/down and call controls on the front.

With 6 pin plug fitted.

New style original replacement microphone for Thunderpole T-800 and T-2000 radios.

A new larger & heavier mic than the earlier version.

Ready wired with 6 pin plug.

Up, Down and ASQ buttons.

We also have this available (cheaper) under the PNI brand - click here

Original microphone as supplied with the tti TCB-771, TCB-881, TCB-990 and TCB1100, with up/down channel change buttons.

Supplied ready wired for the all tti 6 pin radios.

We can not wire it for any other radios.

Original replacement microphone for the tti TCB-550 radio.

Compact electret condenser with slim curly cable.

Supplied as standard with a 4 pin plug wired for the tti TCB-550, TCB-555, TCB-560, TCB-565.

Does not have channel change buttons

Original 6 pin microphone for various President radios without channel change buttons.

We also have some equivalent mics under the "komunica" brand that look identical but are much cheaper.

Original microphone for modern 6 pin President radios, with channel change buttons.

We also have some equivalent mics under the "komunica" brand that look identical but are much cheaper.

Radios that these fit include: President Grant-2, Harry (ASC), Harry Classic, Harry-2, Harry-3, Henry ASC Classic, JFK-2, Jackson-2, Jimmy-2, Johnny (ASC), Johnny-2, Johnny-3, Johnson-2 ASC, Lincoln-2, Taylor-2 Classic, Taylor-3 ASC, Teddy, Tommy, Truman, Walker. 

Original microphone for older 6 pin President radios with channel change buttons.

The channel change wiring is different on these mics to the newer President radios.

These will work on: President George, Grant Classic, Herbert, Herbert New, JFK, JFK Classic, Jackson, James, Johnson, Johnson Classic, Taylor New, Valery Classic, Wilson.

Albrecht replacement electret microphone with up/down channel change buttons on the front.

Should fit any Albrecht 6 pin radio and also any other radios wired the same, such as any Midland 6 pin radios. It is the same mic as used on the Magnum radios and will work on the Deltaforce, Omegaforce and Magnum 257.

Wiring details:

• 1.  Audio (mic)
• 2.  RX
• 3.  TX
• 4.  Up/Down
• 5.  Ground (shield)
• 6.  12v

Same mic as used on K-PO / Maas DX-5000, Anytone AT-5555 & Intek HR5500.

Fitted with 4 pin mic plug.

Original microphone with channel change controls for CRT SS9900.

Same mic as used on Anytone AT-6666.

Fitted with 6 pin mic plug.

Original microphone with channel change controls for the CRT SS7900, CRT2000, and Xenon.

Fitted with a RJ45 "modular" type plug.

Will also work on Midland M30.

An original replacement microphone for the CRT ONE and CRT SPACE radios.

The microphone plugs directly onto the circuit board inside the radio.

The radio needs to be dismantled to fit the mike.