Coax Leads

A standard 50cm coax lead, made from RG58, with a PL259 plug fitted on each end, used for connecting swr meters, amps etc.

Made with proper solder-on plugs  (not cheap crimp-on).

A high quality 50cm coax lead, made from RG8-mini coax (7mm), with a PL259 plug fitted on each end.

Made by ourselves rather than mass produced in India!

A standard coax lead, made from good quality RG58, with a standard quality PL259 plug fitted on each end.

For use with a wide variety of mounts, or for coax extensions etc.

A superior quality coax lead, made from good quality RG58, with a superior quality PL259 plug fitted on each end.

Available from 1m to 10m in length.

For use with a wide variety of mounts, or for coax extensions etc.

A high quality coax lead, made from low loss 7mm RG8-mini coax, with a PL259 plug fitted on each end.

For use with a wide variety of mounts, or for coax extensions etc.

A high quality coax lead, made from the RG8 Mini Super XX low loss 7mm coax, with a superior quality PL259 plug (with gold plated pin) fitted on each end.

This is more flexible than the standard Mini-8 coax and also has a better braid on it.

For use with a wide variety of mounts, base antennas, or for coax extensions etc.

A low loss coax lead, made from RG213 9mm coax, with a superior quality PL259 plug fitted on each end.

Please bear in mind this is not only thicker (9mm) but also less flexible than RG58 and Mini-8 coax.

For use with base antennas, usually for longer cable feeds.

A coax lead made with RG58, with an "old style" DV elbow plug on one end and a PL259 plug on the other end.

For use with DV and 3/8 DV mounts.

Because the plugs are no longer available we can only supply these in a limited number of lengths.

A coax lead made with RG58, with an "new style" DV elbow plug on one end and a PL259 plug on the other end.

For use with DV and 3/8 DV mounts.

Please make sure you order the correct style DV lead - either with the old style or new style DV elbow plug.

A coax lead made with RG58, with an "new style" DV elbow plug on one end and a FME connector on the other end.

The idea of this one is that the FME connection is quite small for feeding through the vehicle and then you screw an adapter on the end once fed through. We do adapters to convert it to PL259 or BNC.

For use with DV and 3/8 DV mounts.

A coax lead made with best quality RG58 coax, with either a superior quality PL259 on each end, or a DV Elbow (new style) on one end.

Simply choose the type and the length from the boxes, and we will make the lead to suit.  The price can be checked in your basket.

Co-Phase harness for use with twin-trucker antennas.

Ready made lead which has a PL259 plug fitted at all 3 ends. The single connection into your radio feeds 2 coax leads for connecting to twin antennas.