A new antenna for CB & 10m with very high power handling.

The antennas feature a clear coil cover and a LED PCB that lights up when you transmit.

The coil is "air wound" and uses 3mm diameter wire which features no solder joints (all connections are screwed), giving maximum power handling and reliability.

Available in both in 3 different fittings, SO239, 3/8 or complete on a fixed body mount.

Note: the version with body mount is not SO239 fitting, it is a fixed mount.

BODY MOUNT VERSION SOLD OUT - available in SO239 or 3/8 fitting

Click here for Full Details

A new antenna for CB & 10m with very high power handling.

The antennas feature a clear coil cover and a LED PCB that lights up when you transmit.

The coil is "air wound" and uses 3mm diameter wire which features no solder joints (all connections are screwed), giving maximum power handling and reliability.

Available in both in 3 different fittings, SO239, 3/8 or complete on a fixed body mount.

SO239 VERSION SOLD OUT - last few complete with mount/coax

Click here for Full Details

A new antenna for CB & 10m with very high power handling.

The antennas feature a clear coil cover and a LED PCB that lights up when you transmit.

The coil is "air wound" and uses 3mm diameter wire which features no solder joints (all connections are screwed), giving maximum power handling and reliability.

Available in both in 3 different fittings, SO239, 3/8 or complete on a fixed body mount.

These 3/8 thread versions have a stainless steel 20cm shaft.

Full Details for 3/8 Version

A new antenna for CB & 10m with very high power handling.

The antennas feature a clear coil cover and a LED PCB that lights up when you transmit.

The coil is "air wound" and uses 3mm diameter wire which features no solder joints (all connections are screwed), giving maximum power handling and reliability.

Available in both in 3 different fittings, SO239, 3/8 or complete on a fixed body mount.

These 3/8 thread versions have a stainless steel 20cm shaft.

Full Details for 3/8 Version

A new high power fibreglass antenna, featuring twin wire logarithmic loading.

The heavy duty twin winding allows it to handle up to 1000W continuous, and the swr is easily adjusted using the tuning tip.

These remind me of a heavy duty version of the DX-27 antenna from the 80's!

Download Instruction Manual

A very popular mid size antenna.

This is very similar to the old Avanti Moonraker (remember them from the 70's?).

Good quality, good performance, and good value for money.

Available as a SO239 fitting antenna only, or complete with matching Sirio mag mount.

The mag mount supplied is the genuine Sirio one - this is enclosed in plastic (stops it rusting) and comes complete with a rubber boot (helps stop it scratching).

This antenna is a SO239 mount not 3/8 thread.

A compact "disguised" CB antenna that looks more like a car radio aerial - it is styled like the early "VW Golf" aerial.

Supplied complete with room mount and coax. The whip can be unscrewed for low garages or car wash.

Don't expect high performance, but if you want something on your car that does not look like a CB antenna then this could be for you.

Download Instruction Manual

A new mobile antenna especially designed for use on non-metalic vehicles, this antenna does not require any groundplane to work correctly. Ideal for use on fibreglass cabs, caravans, boats etc.

• Black fibreglass tapered whip with adjustable angle
• Supplied complete with mirror mount and 4m coax lead
• Integral stainless steel spring for maximum flexibility
• DC grounded for protection from static discharges

Download Instruction Manual

A high performance mobile antenna.

The coil is made from heavy duty plastic and contains a large cross-section copper coil. A swivel adjustment at the top of the coil allows the whip to be angled to suit the position it is mounted.

The whip is tapered and of high quality stainless steel.

The mounting is an SO239 type - as used on Amateur antennas.

A high performance very large mobile antenna.

A larger version of the Hipower 3000, this one features a 2m long whip.

The coil is made from heavy duty plastic and contains a large cross-section copper coil. A swivel adjustment at the top of the coil allows the whip to be angled to suit the position it is mounted.

The whip is tapered and of high quality stainless steel.

Probably the best antenna available - it will certainly outperform a Wilson!

We can supply this antenna either on it's own or complete with the very strong matching Sirio magnetic mount (MAG-145PL).  I would not recommend using this antenna with any other mag mount.

The mounting is an SO239 type - as used on most Amateur antennas.

ADD SIRIO MAG MOUNT

Identical to the Hypower 3000 except for a different styling of the coil.

A high performance mobile antenna.

The coil is made from heavy duty plastic and contains a large cross-section copper coil. A swivel adjustment at the top of the coil allows the whip to be angled to suit the position it is mounted.

The whip is tapered and of high quality stainless steel.

The mounting is an SO239 type - as used on Amateur antennas.

A high performance very large mobile antenna.

Exactly the same specs as the Hypower 4000 but with a slightly different loading coil.

The coil is made from heavy duty plastic and contains a large cross-section copper coil. A swivel adjustment at the top of the coil allows the whip to be angled to suit the position it is mounted.

The whip is tapered and of high quality stainless steel.

Probably the best antenna available - it will certainly outperform a Wilson!

We can supply this antenna either on it's own or complete with the very strong matching Sirio magnetic mount (MAG-145PL). I would not recommend using this antenna with any other mag mount.

The mounting is an SO239 type - as used on most Amateur antennas.

ADD SIRIO MAG MOUNT

The latest addition to the Performer range is the new P2000 - this is designed to handle very high power (if needed) - up to 2000W !!

Comes as a SO239 fitting antenna, you need to use it with a suitable SO239 mount - such as a body mount or mag mount.

Download Instruction Manual

A 3/8 thread fitting version of the Sirio P-2000 antenna, this antenna has an elevated loading coil with solid section between it and the 3/8 thread.

A high power, high performance antenna.

The 3/8 fitting gives more mounting options than the SO239 version.

Download Instruction Manual

A new high power and high quality mobile antenna.

Available in 3 different sizes - from about 4ft to over 6ft.

Similar specifications to the Hypower series but with a unique swivel base, which allows the antenna to be adjusted to any angle.

Fits on any SO239 type mounting.

A new higher power addition to the Performer series - handling up to 5000W for short periods!

Looks similar to the other antennas in the Performer series, complete with swivel adapter, but with a larger coil.

This antenna is a SO239 mount not 3/8 thread.

A new higher power addition to the Performer series - handling up to 5000W for short periods!

Looks similar to the other antennas in the Performer series, complete with swivel adapter, but with a larger coil.

Supplied complete with a dedicated body mount (drill hole) and coax. It is NOT a SO239 fitting.

A new limited edition version of the Sirio Performer 5000 available in either RED or WHITE, renamed the FIGHTER P-5000. Handling up to 5000W for short periods!

Are you an ANGEL or a DEMON??

Looks similar to the other antennas in the Performer series, complete with swivel adapter, but with a larger coil.

This antenna is a SO239 fitting not a 3/8 thread.

New version of this high performance antenna with transparent coil cover and a unique LED light that illuminates when you transmit.

A higher power addition to the Performer series - handling up to 5000W for short periods!

Looks similar to the other antennas in the Performer series, complete with swivel adapter, but with a larger coil.

This antenna is a SO239 mount not 3/8 thread.

Download full details here

New version of this high performance antenna with transparent coil cover and a unique LED light that illuminates when you transmit.

A 3/8 fitting version of the excellent Sirio Performer 5000 antenna - allowing you to easily fit it on a larger range of mounts.

This is a BIG high performance antenna - nearly 7ft tall with a 8" stub beneath the coil. 

A replacement mount/adapter for the Sirio Performer 5000.

This is the same adapter that comes supplied with the Performer-5000 antenna and converts the "swivel" base on the antenna to fit on a SO239 mount.

Can also be used on all the other Performer range (P-600, P-800, and P-1000) but this is a lighter grey colour.

A new 3/8 fitting version of the excellent Sirio Performer 5000 antenna - allowing you to easily fit it on a larger range of mounts.

This is a BIG high performance antenna - nearly 7ft tall with a 8" stub beneath the coil. 

A new limited edition 3/8 fitting version of the excellent Sirio Performer 5000 antenna - allowing you to easily fit it on a larger range of mounts.

Base Loaded - it does not have the stub underneath it like the Performer 5000 Trucker.

This is a BIG high performance antenna - nearly 7ft tall.

Not only good quality but also good looking! This new model is a replacement for the Mythos 9000 and is almost identical except it has a standard stainless steel whip rather than a black one.

This is a very neat mobile antenna with a strong coil and tapered stainless steel whip.

Supplied with complete with DV (swivel) mount and 4m coax lead.

Note:  cable does not have a PL259 plug fitted. It is left blank so you can feed it through the vehicle.

Download Instruction Manual

Original replacement whips for Sirio antennas, including Hypower, Megawatt & Performer ranges.

Choose the antenna that the whip is for from the list.

Unfortunately any whip over 1.2m long will have to be sent by carrier and the delivery charge is £9.95.

Because of the high cost of shipping whips over 1.4m can only be sent as part of a larger order (minimum £30) - this is because it currently costs us over £17 to send out a long parcel!

Replacement part for Sirio Hypower 3000/4000.

Swivel connector where the whip screws into, complete with grub screws.