Export Radios

The radios on this page are NOT legal to use in the UK.

They are included on our website for our various customers in other European countries, where they may be legal, and for customers intending on travelling to countries where they are legal.

Please check the legal requirements for the country where you intend to use the radio.

Add to cart
Latest version - new firmware

A new multimode radio with a classic look. The latest technology inside it, but a retro facia with bright chrome finish and an analogue s-meter.

This radio comes standard as a 10m radio (28.000-29.700MHz) but can be expanded to cover approx 24.8-30MHz in 12 bands including the UK 40.

There are many advanced features including NRC and adjustable echo. Many of these features can be adjusted using menus on the radio.

All the bands can be custom programmed with any frequencies and there are many other options that can be changed using the optional PC lead & software.

This radio now has improved firmware that includes being able to select 500Hz or 5kHz for the clarifier, full 5 decimal point programming to allow exact UK frequencies and ability to check the frequency using the LED display. 

Download User Manual

More details
SPECIAL BUY - SAVE £20
SOLD OUT - more due around 16th October
NEW VERSION 7 with Noise Reduction Circuit Board

Latest generation 10m multimode, that can be expanded to cover frequencies from 25.615 - 30.105 MHz where permitted.

BLUE channel display and BLUE frequency display.

Many of the features of the radio can be programmed by computer to give you a customised radio.

We can supply the radio ready programmed for whatever bands you prefer - but you must ensure that you only use the radio where your licence permits.  Because there are only 6 bands on the radio it can be programmed for either 10m (28-30mHz) or 11m (26-28mHz) but will not cover both at the same time.

Can be switched between 10m & 11m by key presses - without using software.

This is the latest version 7 pcb & software.

Latest version (rev.7) with completely new pcb, firmware & software.

New features includes:

  • NRC - Noise Reduction Circuit
  • VOX (hands-free transmit)
  • CTCSS/DCS
  • RX compander
  • TX Noise Gate
  • Micro type selection : electret or dynamic
  • Program cable connector on the rear panel
  • Extra ventilation
More details
SOLD OUT - discontinued
NEW 2023 VERSION with 5kHz steps

A new high power 10m mobile radio with a super large LCD display, offering all the features you could ask for in a mobile 10m radio.

The radio is PC programmable and can also be programmed for any frequencies from 25-30MHz (for use where allowed).

We will supply the radio pre-programmed for either 10m, 11m or both 10 &11m (please ask at time of purchase).

There is an optional PC lead & software available for an extra £14.95 at time of purchase (normal price £17.95 if bought without the radio).

The radio uses a "modular" type mic plug, but you can use a different mic on it by using one of our mic adapters (£8.95)

You can download a copy of the instructions here

More details
SOLD OUT - new model due late October
Latest Version 4 with DTMF & 12m

A new high power compact 10m mobile radio, offering all the features you could ask for in a compact design ideal for mobile DX.

This latest version can now be programmed from 24.880MHz, allowing you to use it on 12m as well as 10m & 11m. Earlier versions could only be programmed from 25MHz upwards.

The radio is PC programmable and can also be programmed for any frequencies from 24.880MHz-30MHz (for use where allowed).

We will supply the radio pre-programmed for either 10m, 11m (CB) or all bands 10m, 11m & 12m (please ask at time of purchase).

There is an optional PC lead & software available for an extra £17.95 at time of purchase (normal price £19.95 if bought without the radio).

Please note that the latest version of the software is v.3, this is the software for use with v.4 of the radio.

More details

Echo Board for CRT Superstar 3900

SSEB
Add to cart
 

Internal echo board for the CRT Superstar 3900.  This only fits the 3900 with the 6 band switch on the front of the radio (branded CRT Superstar) and will not fit the current Superstar 3900.

Note: this board does not fit any other radio.