Standard size PL259 coax plug, to fit standard thin coax (RG58).
Available in a variety of different qualities.
Short bodied PL259 coax plug, to fit standard thin coax (RG58).
Standard size PL259 coax plug, to fit RG Mini8 coax (7mm).
These have a slightly larger hole to accept the larger diameter of this coax.
Standard size PL259 coax plug, to fit thick coax (RG213).
A pack of 10 standard quality PL259's.
Choice of 6mm, 7mm or 9mm.
A double female joiner, for joining two PL259's together.
Often used for adding an extension lead to coax.
A double male, with PL259 connection on each end.
Can be used instead of a short patch lead etc.
A SO239 socket for either rivet or screw mounting.
As used on the back of radios, swr meters etc.
A SO239 socket which is secured by a nut.
As used on the back of some radios, swr meters etc.
A right angle adapter with a PL259 plug at one end and SO239 socket at the other.
Handy if you are short of space behind your radio.
A "T" connector for PL259's.
Has two sockets, plus a "fixed" PL259 male in the centre.
Solder-on BNC plug to fit standard 6mm coax.
I recommend the solderless version - it is much easier to fit, grips the cable better, and is re-usable.
Back in Stock
A BNC plug for 6mm coax which can be fitted with only a small screwdriver. No soldering iron required.
Fits similar to a TV plug. The clamp grips the cable securely and we have found these much less likely to pull off or come loose than a standard solder type.
Can be easily removed and re-fitted.
Solder-on BNC plug to fit low loss 9mm coax.
A female in-line socket to accept an N-Type plug.
Fits standard (6mm) thin coax.
A double female joiner, with a female N-Type socket on each end.
Used to join two N-Type plugs together.
Double female joiner, to join two SMA plugs together.
May be useful for some of the radios that have a "reversed" socket on them for the antenna (ie they have a male socket on the radio)?
Standard size car aerial plug.Easy fit.
In-line aerial socket, to accept a standard car aerial plug.
Easy fit.
