Voted UK No.1 for CB Radio
Manufacturers original replacement microphones. These usually have special features such as channel change.
The extra features on these mics will usually only work on the original radios they are intended to fit.
Original microphone for RadioShack and Realistic radios, including the big old Realistic handhelds!
Comes complete with 5 pin DIN plug fitted with locking clip, but we will supply it wired for whatever radio you like.
Albrecht replacement electret microphone with up/down channel change buttons on the front.
Should fit any Albrecht 6 pin radio and also any other radios wired the same, such as any Midland 6 pin radios. It is the same mic as used on the Magnum radios and will work on the Deltaforce, Omegaforce and Magnum 257.
An original replacement microphone for the Midland 38 and Midland 98, with up/down and band change buttons on the top.
Will also work on most other Midlands which use a channel change mic (eg Midland 48) and also on some Kernow radios (eg Kernow Beta 3100).
Fitted with a 6 pin plug.
This microphone is basically the same as the Midland 38/98 microphone but only has two buttons on the top (up/down) - there is no band button.
Note: picture shows the 38/98 mic. The one supplied only has 2 buttons on top.
Small original replacement mic for early Midland 78 plus and 48 plus, with channel up/down controls on the front.
Model number MR-120. With 6 pin plug fitted.
Original replacement microphone for Midland Multi 78,48 & 248, with channel up/down and lock controls on the top.
Will also work on the Midland 38 & 98, but the lock button will not do anything.
With 6 pin plug fitted.
Original replacement microphone for Midland 210DS & Midland 203, WITHOUT channel up/down controls on the top.
These have an electret mic element and could be used on many of the newer radios that use electret mics, if rewired to suit.
Fitted with a 4 pin plug wired "Uniden".
Original light blue microphone for the Midland "Precision Series" radios - the old 2001, 3001 and 4001.
This is a standard dynamic mic, and should not be confused with the similar looking electret mics used on the current Midlands such as the Midland 38 and 48.
Original Danita replacement microphone, as used on the Danita 3000 CB.
Fitted with 6 pin mic plug.
Up, down and lock buttons on top of mic.
These will work as a standard microphone on Midland radios but the channel change buttons will not work.
Limited stock available
Small original replacement mic for various Team radios, with channel up/down and call controls on the front.
Original microphone as supplied with the Inkek M490 and Intek M790, with channel change controls.
Will work on all Intek radios that use a 6 pin mic.
Original 4 pin microphone as supplied with the Inkek M110 & Thunderpole T-1000.
May be supplied with Thunderpole or Intek name on it.
No channel change buttons.
Original replacement microphone for Thunderpole T-800 and T-2000 radios.
Ready wired with 6 pin plug.
Up, Down and ASQ buttons.
Original microphone as supplied with the tti TCB771, tti TCB881, tti TCB990 and TCB1100, with up/down channel change buttons.
Supplied ready wired for the all tti 6 pin radios.
Original replacement microphone for the tti TCB-550 radio.
Compact electret condenser with slim curly cable.
Supplied as standard with a 4 pin plug wired for the tti TCB-550.
Does not have channel change buttons
Original microphone for President Walker and Johnson, with channel change buttons.
Can also be used on the President Harry, to replace the original one which does not have channel change.
Original microphone with channel change buttons as supplied with Magnum DeltaForce radios.
Fitted with 6 pin mic plug wired for the Magnum Deltaforce & Omegaforce.
We have the Albrecht AE4197 as an alternative - looks the same but has the Albrecht name on it.
Same mic as used on K-PO / Maas DX-5000, Anytone AT-5555 & Intek HR5500.
Fitted with 4 pin mic plug.
Original microphone with channel change controls for CRT SS9900.
Same mic as used on Anytone AT-6666.
Original microphone with channel change controls for the CRT SS7900 and CRT2000.
Fitted with a "modular" type plug.
An original replacement microphone for the CRT ONE and CRT ONE-N.
The microphone plugs directly onto the circuit board inside the radio.
The radio needs to be dismantled to fit the mike.
An original replacement microphone for the CRT Millenium.
Fitted with a "modular" plug.
Original Albrecht microphone as supplied with the AE-6690 & AE-6890.
With illuminated up/down buttons and long thin curly cable.
Original Midland microphone with up/down channel change.
Fitted with a 5 pin DIN plug.
Note: this mic has a straight plug on it, the original one for the 77-1165 had a right angled one.