A wireless microphone with built-in speaker for use on any of the current 6-pin President CB radios.Not only does this microphone allow you to transmit from anywhere in the room, it also has a speaker built-in so that you can hear the CB without being sat next to it - you can even use it in another room!The microphone itself is rechargeable and is supplied with a car charger that plugs into your cig lighter socket. The receiver is powered directly from the radio mic socket.Although designed for President radios this mic will also work on many other 6 pin radios.
Download Instruction Manual
A replacement DTMF microphone with a 6 pin "modular" plug suitable for use with various Yaesu radios.
This is not an original Yaesu microphone but is 100% compatible.
Suitable for use with: FT-1500, FT-1500M, FT-1802, FT-1802M, FT-1807, FT-1807M, FT-1900, FT-1900R, FT-2500M, FT-2600, FT-2800, FT-2800M, FT-2900, FT-2900R, FT-3000, FT-7100, FT-7100M, FT-7800, FT-7800R, FT-7900R, FT-8100, FT-8100M, FT-8500, FT-8500M, FT-8800, FT-8800R, FT-8900, FT-8900R
Suitable for use with many Yaesu radios including: FT90R FT2600M FT3000M FT8000R FT8100R
A compact handsfree system which can be supplied wired to fit most makes of CB. Note this is not voice operated, you need to press the PTT (press to talk, press again to stop).
Control box (as shown in picture) is very simple, with a PTT button on it and a "time out" selector. It hangs on a standard mic clip for easy mounting anywhere.
The microphone is a compact electret mic, which is designed to be mounted as close to the user as possible. It is supplied with approx 3.5m of cable.
Note: these will only work on radios that use an electret mic as standard.
A microphone system for fitting in a closed face helmet.
The kit consists of:
Now available with a choice of 4 different connectors to suit most radios.
A microphone system for fitting in a open face helmet.
Replacement electret microphone with up/down channel change controls on the top.
Fitted with a 6 pin plug, wired for most channel change radios (eg Midland, Kernow etc).
A very high quality microphone from this USA manufacturer, you can feel the quality as soon as you pick it up.
Unfortunately because this is a non amplified noise cancelling microphone, the output from it is actually quieter than a normal standard microphone. You can only really use it on a radio where the internal mic gain is set higher than normal.
A good quality replacement microphone for use with various Taxi & PMR radios.
Supplied fitted with "modular" plug (similar to a telephone plug) to suit your radio - select from the list.