An original rig bracket to fit the Midland 77-099 and 77-104 radios.
This does not fit the new 80 channel midlands.
Size: 117mm.
An adapter which will allow you to fit a CB radio into a standard DIN size radio hole in a vehicle.
Two sizes are available, which will fit various current CB's.1. Small - fits Midland 78, Danita 3000, tti TCB770, Intek M-110, Intek M-790.2. Large - fits Midland 48, tti TCB-880, Intek M-490.
All plastic construction.
We now stock a range of 12 different size DIN adapter brackets to suit most makes and models of CB.
Ideal for trucks etc which have a spare radio size hole in addition to their normal radio slot.
Includes all hardware required to fit the bracket to your radio.
All metal construction.
A universal bracket which will fit most radios. The bracket slides open/closed to adjust to almost any width.
Supplied with "runners" that can be attached to the side of your radio for quick removal, alternatively you could just use the holes in the side of these brackets to fit your radio as normal.
Original rig bracket suitable for the Cobra 148 and Superstar 2000 radios. May suit some other large multimodes.
Size: 206mm
Enables the quick removal of your radio from your vehicle, and if you use several vehicles or radios it allows you to easily swap radios between vehicles.
This is a full size version with all onnections fitted - for power, speaker and antenna.
The mount is lockable (supplied with key), although it is unusual for anyone to bother locking it.
You need to either fix your normal mounting bracket to the slide mount, or drill holes in the casing of your rig and attach the slide mount directly.
Size: 15cm wide x 18cm deep (approx).
This is a smaller size version but still with all connections fitted - for power, speaker and antenna.
Ideal size for most of the newer more compact radios.
Size (radio half): 10cm wide x 9cm deep (approx).
An unusual bracket made by FireStik, it is sprung loaded and "grips" your standard rig bracket.
Radio quickly fits in/out of the bracket for removal from the vehicle.
Original replacement bracket for a President Lincoln or Uniden 2830.
Expensive - but it is the only one which will fit correctly.
A replacement rig bracket which will fit some Uniden radios.
Size: 164mm (aprox 6.5 inch)
A cheap replacement rig bracket - the only problem is we have not yet found a radio it will fit!
Size: 173mm (approx 7 inch)
Large plastic replacement thumb screws. Price is per pair.
Available in 4mm, 5mm, and 6mm thread.
** 6mm back in stock**
Smaller all metal replacement thumb screws. Price is per pair.
