A 3/8 thread mount with "DV" connection underneath.
This is our most popular mount, having a good rubber seal and the use of a "DV plug" means the coax comes out at a right angle (ie parallel with the body) rather than straight down.
A mount with DV (swivel) top and "DV" connection underneath.
By adding a "3/8 to DV adapter" (C52) you can use this mount to angle the antenna (eg for mounting on a sloping surface).
The mount has a good rubber seal and the use of a DV plug means the coax comes out at a right angle (ie parallel with the body) rather than straight down.
Remember to order a wingnut/bolt to go with it if you need one!
A 3/8 thread mount with SO239 coax connection underneath.
Often used on mirror mounts etc.
A 3/8 thread mount with SO239 coax connection underneath and a large washer.
A popular heavy duty mount.
Note that the coax will come straight down from the mount, so you need plenty of room underneath it when fitting.
Chrome 3/8 stud mount
A heavy duty 3/8 thread mount with SO239 coax connection underneath.
The construction is very strong and ideal for large and heavy antennas.
A 3/8 mount where the coax fits directly into the base. No soldering required, simply clamps together.
As found on many gutter and mirror mounts.
Has the advantage of a very low profile (so can be fitted under roof lining etc).
A slim 3/8 mount complete with 4m coax and PL259 fitted.
Often used on gutter mounts, mirror mounts etc.
Mounts as in the picture but with coax lead fitted.
A very heavy duty 3/8 thread mount with a SO239 fitting underneath.
This is a VERY stong mount and is the ideal mount for very large/heavy antennas such as a Firestik or 9ft whip.
Has a large serrated washer underneath.
We have had the Valor version of this for sale in the past for over £10!
A very heavy duty 3/8 mount with SO239 socket for the coax. Ideal for large and heavy antennas such as Firestiks.
These are a clearance item and would usually have been well over £10.
There are only available in RED
The strongest body mount we have ever stocked - designed for use with the very big & heavy antennas such as a 7ft Firestik!!
The 3/8 thread bolt shown in the picture can be unscrewed so that you can fit a standard 3/8 antenna into the mount.
The mount is fitted to the body with 3 bolts. The coax is fitted directly to the mount using crimp connectors.
A SO239 mount with DV plug fitting underneath.
Made by Sirio and designed to match their range of SO239 fitting antenna (eg Hypower 3000/4000), but equally suitable for any make of antenna.
Good rubber seal underneath and supplied complete with a screw-on weather cap.
Heavy duty SO239 body mount - with SO239 top for antenna and SO239 underneath for coax connection.
For use with SO239 fitting antennas, not 3/8 thread antennas.
A SO239 mount where the coax fits (and solders) directly into the mount.
These are often found on gutter and mirror mount.
Low profile, ideal for fitting where space is limited.
Supplied without coax.
A SO239 mount complete with 4m RG58 coax fitted.
Same mount as the one above, but supplied with coax fitted.
The strongest way to fit an antenna onto a vertical surface (eg side or back of truck).
This mount requires 2 small holes to be made in the body, rather than the usual 1 larger hole.
Coax is fitted directly to the mount, using ring terminals.
Can be supplied as a mount only, or complete with a coax lead with connectors and plug fitted.
