Magnetic

Magnetic mounts (mag mounts) are a very popular way of mounting a mobile antenna - because it is so easy.

So long as your vehicle is made of metal (ie not a fibreglass cab or aluminium like a Landrover) all you have to do is stick the mag mount on (preferably in the middle of the roof), screw the antenna in, plug the coax into your radio and away you go!

Mag mounts allow you to adjust the position of your antenna for best performance - this is usually as high and as central as possible.

The main disadvantage of mag mounts is that because they re outside in all weathers, and the coax connection is outside rather than under your roof, they do rust up and get bad connections inside.

You must make sure you choose a mag mount large enough for your antenna - if you do then you will have no problems, but too large an antenna (or too small a mag) and it will come off as you travel down the road.

!

Mini Mag with Boot

B08b
!
Larger picture 

A small 3/8 thread mag mount, approx 3.5" diameter, with rubber boot to help prevent scratching.

The coax is moulded into the 3/8 mount, which sits on top of the mag base. It comes complete with approx 12ft of coax and a fitted PL259 plug.

Suitable only for small antennas, typically up to about 3ft in length (although this depends upon the style of the antenna).

Turbo Mag with Boot

B12b
!
Larger picture 

A large 3/8 thread mag mount, approx 7" diameter, with rubber boot to help prevent scratching.

The coax is moulded into the 3/8 mount, which sits on top of the mag base. It comes complete with approx 12ft of coax and a fitted PL259 plug.

Suitable only for most base loaded antenna up to about 1.6m (5ft) in length or smaller centre-load antenna.

Very stong.  Our most popular mag mount.

Mag Replacement Lead

B75
!
Larger picture 

A replacement moulded mount with coax lead and PL259 fitted.

This is a replacment lead for the standard mag mounts (B08b and B12b).

Also available as a SO239 fitting.

Chrome 5" Mag Mount

B17
!

A very strong chrome plated magnetic mount with a heavy duty 3/8 thread fitting and 17ft of good quality coax.

Model LMM-1

Sirio Mag-125 Mag Mount

!
Larger picture 

A high quality magnetic mount from Sirio.

The mag mount has a plastic casing - preventing rust appearing as seen on cheaper mounts.  It also has a removable rubber boot, to help prevent scratching.

Although only about 5" in diameter, this mag is as strong as the 7" turbo mag!

Available with either a 3/8 or SO239 fitting.

Sirio Mag-145 Mag Mount

!
Larger picture 

A very strong high quality magnetic mount from Sirio.

The mag mount has a plastic casing - preventing rust appearing as seen on cheaper mounts.  It also has a removable rubber boot, to help prevent scratching.

Approx 6.25" in diameter, this is the strongest mag mount we supply (except for the triple mags).

This is the mount to use with the Sirio Hypower 4000 and MegaWatt 4000 (which are 7ft long!).

Available with either a 3/8 or SO239 fitting.

Triple Mag

!
Larger picture 

Triple Mag

A very strong mag mount assembly consisting of three 5" mag mounts fastened together, with a mount fixed centraly between them.

Used on HF whips and 1/4 wave 10/11m whips.

Comes complete with mount and about 12ft of coax with PL259 fitted.

Available with either a 3/8 or SO239 mount.

Make sure you are strong enough to pull it from the car before ordering!

K40 Mag Mount

B14
!
Larger picture 

Special magnetic mount for the K40 antenna.

Note that you must already have the trunk (boot) mount complete with cable which comes on the K40, because this simply sits (and is fastened) inside the mag base.

Very strong!

Wilson Replacement Mag Mount

B17b
!
Larger picture 

Genuine replacement mag mount for Wilson 1000 antenna.

Available in black or white.

Replacement Rubber Boots

!
Larger picture 

Replacement rubber boots to fit on the base of mag mounts.

These are designed to replace a damaged boot and will usually only fit the original mag mount they are designed for.

Sirio 3/8 to SO239 Adapter

C88s
!
Larger picture 

Made by Sirio to fit on their SO239 mounts (either magnetic or body) to convert them to accept a 3/8 thread antenna.

When fitted on the matching mag mount, you can not even see there is an adapter there!