Knights Electrocom

A low price complete CB mag mount antenna.

Centre-load antenna, approx 65cm long, with integral shock spring.  Complete with magnetic mount with coax and PL259 plug fitted.

Performance is poor compared to a larger antenna, and the fitting is non-standard so you can not put another whip on the mount.

If you only need something cheap which will get a couple of miles, then this may be suitable for you.

A very popular complete mag mount antenna.  Basically the same as the Sirio ML145 but £10 cheaper!!

This is very similar to the old Avanti Moonraker (remember them from the 70's?).

Good quality, good performance, and good value for money.

The antenna is a SO239 fitting and is supplied complete with a magnetic mount. The mag mount is enclosed in plastic (stops it rusting) and comes complete with a rubber boot (helps stop it scratching).

The original high quality, high performance antenna - the one everyone has heard of.

Long before we had Wilson antennas, this was THE antenna to have. It was certainly about in the 70's, when they were first made I don't know!  If something has been made the same for over 30 years it must be right!

Supplied complete with trunk (boot) mount, this can be dis-assembled to mount the antenna directly on the roof.

A special (very strong!) mag mount is available as an optional extra to fit on the antenna.

We stock replacement whips, coils and mounts for the K40.

Select the part you require from the drop-down list.

A 9ft long, 2 piece, whip antenna, ideal for mobile DX.

Standard 3/8 thread on the base, the antenna splits in half for easy transportation.

The bottom half is quite thick and rigid, the top half is a "standard" whip as found on many mobile antennas. This slots into the bottom half and is secured with a grub screw.

Universal replacement whips to fit a variety of antennas.

The straight whips fit most Modulator and most Thunderpole antennas.

The tapered whips fit the Thunderpole antennas which have tapered whips and the Thorobred Z27.

A high power, heavy duty, Firestik type fibreglass wirewound antenna from this famous USA manufacturer.
Currently we only stock the 36" version, in white.

• 1000 Watt maximum power handling
• Top loaded, helically wound
• 16 gauge copper windings
• Solid fibreglass rod
• Standard 3/8 thread fitting

We have a very limited stock of the original American Firestik antenna.

Available in 5ft black only.

We have a very limited stock of the original American 7ft Firestik antenna.

Ideal for static mobile DX work.

Note: because of the size of these they can only be sent by carrier at a cost of £7.95. Best bet is to buy other things at the same time to save carriage costs!

Here you can add any other antenna from our price list to your order.

Simply add the description in the space provided.

The price will NOT be shown on the shopping cart.