Knights Electrocom

A  Wall Bracket supplied complete with two 1.5" U-Bolts.

Available in 6" or 9".  Please note this is measured to the end of the bracket, so the pole will be about 2" closer to the wall than this.

A pair of Wall Brackets supplied complete with two 2" U-Bolts.

Available in 12", 18", or 24".  Please note this is measured to the end of the bracket, so the pole will be about 2" closer to the wall than this.

A lightweight pole and bracket, ideal for mounting small base antennas to a wall or facia or even in the loft.

Pole stands approx 8" from wall and is approx 30" high. Diameter 1".

This is only suitable for small antennas (probably up to 9ft) and will not be strong enough for larger base antennas.

Standard lashing kit, as used on TV aerials.

Light duty, press steel bracket plus lashing kit.

You may need to 2 of these if you are erecting a large CB antenna, or alternatively use one of the heavy duty double lashing kits.

Heavy duty double lashing kit, this is usually strong enough to hold any CB or Amateur antenna.

Comes complete with U-Bolts.

Replacement U Bolts for use on brackets and antennas.

The standard 1.5" and 2" are the ones supplied with out brackets.  The "antenna" u-bolts are the slimmer type 1.5" ones which come with the standard British made base antennas (and many other antennas).

We stock both 6ft and 10ft galvanised steel poles, but unfortunately only the 6ft can be supplied mail-order, the 10ft must be collected.

The steel poles are tapered at one end and are interlocking so that you can join several together.

The aluminium poles are not interlocking.

Note: poles can only be sent by carrier, not normal post, so the carriage will be £7.95 whether you order 1 pole or 10 !!

We stock both 6ft and 10ft alloy poles, but unfortunately only the 6ft can be supplied mail-order, the 10ft must be collected.

These aluminium poles are not interlocking.

Note: poles can only be sent by carrier, not normal post, so the carriage will be £7.95 whether you order 1 pole or 10 !!

A new style heavy duty interlocking steel pole, available in 5ft lengths.

The ends are tapered and "clover leaf" shaped allowing you to securely slot 2 or more poles together to give a longer mast. The shape of the interlocking ends means that the poles will not rotate and are a good tight fit.

Gold colour galvanised finish.

A set of 4 interlocking aluminium poles, which slot together to give you a maximum length of 20ft.

These are available in a choice of 4 diameters - obviously the larger the diameter the stronger the mast will be.

I would recommend that all masts over 15ft should be guyed.

A standard antenna rotator complete with control box.

Although this will turn up to 50kg it is not the weight that will damage the rotator but the wind force on it.  Customers have certainly used these on 3-element beams, but I think a 4-element is getting too large for it.

Support bearing for use with a standard rotaor.

This allows you to mount the rotator at the base of the mast rather than at the top and then add a second support mast.

A clamp for joining 2 poles up to 2" in diameter.  Will clamp down to any smaller size.

You will usually require 2 of these, spaced a reasonable distance appart.

A clamp for joining 2 poles up to 2" in diameter.  Will clamp down to any smaller size.

Because of the design of this bracket you can use it to join 2 poles either in parallel or at right angles to each other (ie to add a cross-bar etc).

An extra large and heavy duty single pole to pole clamp.

Suitable for two poles up to 2.5" diameter.

For poles up to 2", I would advise using the cheaper standard pole to pole clamp (F25 above).

A genuine bracket from Sirio designed to allow you to mount the Sirio 827 and Sirio Starduster M400 onto any size pole from 1.25" to 2" diameter.

Normally these antenna sit "on top" of the mounting pole, which must be 35-40mm to fit correctly, this adaptor consists of a short length of the correct size poles connected to a bracket with u-bolts.

Similar to "rawl bolts" but much cheaper.

Requires a 10mm masonary drill.

A 4ft copper plated earth rod complete with clamp for attaching an earth wire.

A good earth connection can not only help reduce interference but can also improve performance of your station.

A guy rope clamp to fit 1.25" or 1.5" poles.

Hooks for 3 guy wires.

A guy rope clamp to fit 1.25" or 1.5" poles.

Hooks for 4 guy wires.

A metal joing sleeve to join 2 poles together.

Available for 1.25", 1.5" and 2" poles.